View Image - Java Mode - D-Link DCS-1000W Manual

View Image – Java Mode
Click on "View Image – Java Mode" from the Home screen to access the
video images from the Internet Explorer or Netscape browser as illustrated
below:
Camera Name* - The Camera name will be display when the Camera Name
field is entered in the Web Configuration setting under "System"
Location** - The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under "System".
In the View Image – Java Mode you are allowed two output triggers. Just click
on the desired selection "ON" or "OFF" to utilize the options for each of the
output triggers (Output 1 trigger or Output 2 trigger).
Note 1:
Output trigger will send a 5V signal to the device connected to DCS-1000W.
A maximum of two devices is permitted to connect to DCS-1000W to utilize
the output trigger function. Please refer to appendix for detailed information.
Note 2:
Administrator has the authority to allow user's the permission to set the output
trigger functions through the setting in the "Users" of System Administration
menu bar.
Camera Name*
Location**
31
Click on "Home" to
return to Home Screen