Unpacking The Dcs-1000W; Hardware Installation - D-Link DCS-1000W Manual

2.4ghz wireless internet camera

Hide thumbs Also See for DCS-1000W:

Table of Contents

Unpacking the DCS-1000W

Carefully remove all items from the package. In addition to this User's Guide,

be certain that you have:

One Wireless Internet Camera

Two External Wireless Antennas

One Installation CD-ROM

One AC power adapter

One Camera Stand

One Category 5 Ethernet Cable

This manual

If any item is missing, or if you find any damage or mismatch, promptly

contact your dealer for assistance.

This section describes the Hardware installation procedure for DCS-1000W.

1. Attach Wireless Antenna

From the rear panel of DCS-1000W screw

the 2 external antennas that came with DCS-

1000W into the antenna connector.

2. Configure Network Communication

From the rear panel of DCS-1000W select the

desired network communication for DCS-

1000W from the Slide Switch. Position the

Slide Switch to the setting required either LAN

or LAN/WLAN position.

Please refer to the Physical Description

section for detailed information.

Table of Contents