System Administration - Information; System Administration - Tools - D-Link DCS-1000W Manual

System Administration - Information

The Information menu contains commands for displaying information about
the DCS-1000W.
Click on "Information" in the system administration menu bar and the
Information screen will appear as illustrated below:
Click on "Home" to
return to Home Screen
The Information table provides detailed information about the DCS-1000W
such as the Model Name, Firmware Version, Mac Address, and IP Address.

System Administration - Tools

The Tools menu contains commands for restarting DCS-1000W.
Click on "Tools" in the system administration menu bar and the Tools screen
will appear as illustrated below:
Click on "Home" to
return to Home Screen
Reset:
The Reset command restarts the DCS-1000W is you were to turn it off and
then on again, with settings being retained The Reset panel contains the
message "Do you really want to reset this device?" and a YES button. If you
do not want to reset DCS-1000W, exit the panel without clicking YES,
otherwise, click on the "YES" icon and the reset process will initiate.
28