Using The Dcs-2000 - D-Link DCS-2000 Manual

Using the DCS-2000

If you are following this manual in the order it is presented, you should now have
an operating DCS-2000 Internet Camera configured with the Installer program.
You also have installed the Surveillance Software from the CD. This section
of the manual wil deal with using the Internet Camera in two parts:
•
Using the DCS-2000 with an Internet browser and accessing
the screens to control and monitor the camera.
•
Using the Surveillance Software with the DCS-2000.
Using the DCS-2000 with an Internet browser
Open your Internet Explorer Webbrowser and enter the IP address for your
Internet Camera.
In the example this address is 192.168.0.146. Your address may differ.
If a window appears asking to install a Versign certificate for authentication
D-Link click "Yes".
19