Copying Core Dumps To An Ftp Server - Cisco 11503 - CSS Content Services Switch Administration Manual

Enabling and Copying Core Dumps

Copying Core Dumps to an FTP Server

Cisco Content Services Switch Administration Guide
1-32
Use the copy core ftp command to copy a core dump to an FTP server. This
command is available only in SuperUser mode.
Before you copy a core dump from the CSS to an FTP server, create an FTP record
file containing the FTP server IP address, username, and password. For
information on configuring an FTP record, see the
section.
The syntax for this command is:
copy core coredump_filename ftp ftp_record filename
The variables are as follows:
coredump_filename - The name of the core dump on the CSS. Enter an
•
unquoted text string with no spaces and a maximum of 32 characters.
ftp_record - The name of the FTP record file that contains the FTP server
•
IP address, username, and password. Enter an unquoted text string with no
spaces and a maximum of 32 characters.
filename - The name you want to assign to the file on the FTP server. Include
•
the full path to the file. Enter an unquoted text string with no spaces and a
maximum of 32 characters.
For example:
# copy core dumpfile ftp ftpserv1 starlogthurs
Chapter 1 Managing the CSS Software
"Creating an FTP Record"
OL-5647-02