Cisco 11503 - CSS Content Services Switch Administration Manual page 46

Using the Running-Config and Startup-Config Files
•
The following example shows a running-config file. Comments are preceded by
an exclamation point (!). Note that the CSS does not display default values in the
CSS running configuration or startup configuration even if you manually enter the
values.
# show running-config
!************************ GLOBAL **********************
ip route 0.0.0.0/0 158.3.7.2
!********************** INTERFACE *********************
interface e1
interface e2
!*********************** CIRCUIT **********************
circuit VLAN1
circuit VLAN2
!*********************** SERVICE **********************
service serv1
service serv2
!************************ OWNER ***********************
owner arrowpoint.com
Cisco Content Services Switch Administration Guide
1-12
show running-config urql {urql name} - Displays the components of the
running-config file for existing uniform resource locator qualifier lists
(URQL). For information about a specific URQL, enter the URQL name as a
case-sensitive unquoted text string.
bridge vlan 2
bridge vlan 2
ip address 10.3.6.58 255.255.255.0
ip address 158.3.7.58 255.255.255.0
ip address 10.3.6.1
active
ip address 10.3.6.2
active
content rule1
ip address 158.3.7.43
protocol tcp
port 80
add service Serv1
add service Serv2
active
Chapter 1 Managing the CSS Software
OL-5647-02