Boot Setup Quick Start; Table 2-1 Boot Setup Quick Start - Cisco 11503 - CSS Content Services Switch Administration Manual

Boot Setup Quick Start

Boot Setup Quick Start
Cisco Content Services Switch Administration Guide
2-2
Table 2-1 provides a quick overview of the steps required to configure the CSS to
boot from a primary boot file and from a secondary boot file. Each step includes
the CLI command required to complete the task. For a complete description of
each feature and all the options associated with the CLI command, see the
sections following Table
Table 2-1 Boot Setup Quick Start
Task and Command Example
Create a File Transfer Protocol (FTP) record file to use when accessing an
1.
FTP server from the CSS. This step is optional.
# ftp-record arrowrecord 192.168.19.21 bobo "secret" /outgoing
Refer to Chapter 1, Managing the CSS
Note
an FTP record.
Access boot mode.
2.
(config)# boot
Specify the primary boot configuration.
3.
(config-boot)# primary boot-file ap0720002
(config-boot)# primary boot-type boot-via-ftp arrowrecord
Specify the secondary boot configuration.
4.
(config-boot)# secondary boot-file ap0720001
(config-boot)# secondary boot-type boot-via-disk
Exit from boot mode.
5.
(config-boot)# exit
Save your configuration changes to the startup-config file (recommended).
6.
If you do not save the running configuration, all configuration changes are
lost upon reboot.
(config)# copy running-config startup-config
Chapter 2
2-1.
Specifying the CSS Boot Configuration
Software, for details on creating
OL-5647-02