Cisco 11503 - CSS Content Services Switch Administration Manual page 272

Using the Command Scheduler
•
•
Any of the time variables can contain one or some combination of the following
values:
•
•
•
•
For example:
(config)# cmd-sched record periodic_shows 30 21 3 6 1 "show
history;show service;show rule;show system-resources"
To enable command scheduling, enter:
(config)# cmd-sched
To disable command scheduling, enter:
(config)# no cmd-sched
To delete a configuration record, enter:
(config)# no cmd-sched periodic_shows
Cisco Content Services Switch Administration Guide
8-4
command - The commands you want to execute. Enter a quoted text string
with a maximum of 255 characters. Separate multiple commands with a
semicolon (;) character. If the command string includes quoted characters,
use a single quote character; any single quoted characters not preceded by a
backslash (\) character is converted to double quotes when the command
string is executed.
logfile_name - An optional variable that defines the name of the log file. Enter
a text string with a maximum of 32 characters.
A single number to define a single or exact value for the specified time
variable.
A wildcard (*) character matching any valid number for the specified time
variable.
A list of numbers separated by commas, with a maximum of 40 characters, to
define multiple values for a time variable.
Two numbers separated by a dash (-) character indicating a range of values
for a time variable.
Chapter 8 Using the CSS Scripting Language
OL-5647-02