Connecting To The Network Interface Cards - Nokia IP2255 - Security Appliance Installation Manual

4
Connecting to the Network
Interface Cards
This chapter describes the network interface cards (NICs) available for the
Nokia IP2255 appliance and how to connect those NICs to your network. The
following NICs are described:
When you purchase a NIC with your appliance, the NIC is installed before the
appliance is delivered to you. For information about how to add or replace a
NIC, see
For information about the Ethernet management ports in slot 5, see
Management Ports"
The NICs that the Nokia IP2255 appliances support connect to the Nokia
ADP subsystem. All NICs are hot swappable and can be used in any
combination.
You can configure and monitor NIC interfaces with Nokia Network Voyager
or the CLI.
For information about how to access Network Voyager and the related
reference materials, see
Nokia IP2255 Security Platform Installation Guide
Eight-Port 10/100 Ethernet NIC
Two-Port and Four-Port Copper Gigabit Ethernet NIC
Two-Port and Four-Port Fiber-Optic Gigabit Ethernet NIC
Single-Port Fiber-Optic 10 Gigabit Ethernet NIC
Chapter 6, "Installing and Replacing Network Interface Cards."
on page 23.
"Using Nokia Network Voyager"
"Ethernet
on page 53.
59