HP J3111A - JetDirect 600N Network Card Manuallines page 27

We can now
see our policy.
Rules are
processed from
1 to 10. If a
packet comes
from or is
going to our
defined
IPv4/IPv6
subnet, the rule
will match and
it will be
allowed.
Otherwise, if it
is a
management
service, it will
be dropped.
All other traffic
will be allowed
(the default rule
is allow). Click
"Finish".
Select "Yes" for
Enable Policy.
HTTPS failsafe
can be used
when trying out
configurations.
If this is your
first firewall
configuration,
you may want
to enable it,
and then
disable it once
it has been
tested. Click
"Ok"
27