HP J3111A - JetDirect 600N Network Card Manuallines page 20

We'll define the
IPv4 address
range first.
Select "All IPv4
Addresses" for
Local Address
and then we
specified the
192.168.0/24
subnet for the
Remote
Address.
We've also
named this
address
template very
clearly.
Now for IPv6.
Click "New"
again. NOTE: If
IPv6 is not used
on your
network, go to
TCP/IP settings
and disable
IPv6 for
increased
security. You
can also skips
which use IPv6
in this
configuration.
20