Recommended Security Deployments: SET 4
First and foremost, SET 4 configuration needs to have the Security Wizard for SET 2 executed. Once
the Security Wizard configuration has been completed, then we can begin the IPsec configuration.
Let's go through the same process as we did with SET 3, only this time, we'll simply say that all IP
addresses must use IPsec to utilize a management protocol. If an end station tries to communicate
with a management protocol to Jetdirect without using IPsec, the packets are dropped by the IP layer.
Be sure that
you are using
for the default
rule and then
Select "All IP