3Com 3C905-TX Installation Manual page 4

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Installation Requirements
Supported Platforms
To find out in which PCs you can install a 3C905B-TX card, go to one of
the following HP Web sites:
For Vectra Corporate PCs
•
http://www.hp.com/go/vectraaccessories
For Brio Business PCs
•
http://www.hp.com/go/brioaccessories
For Kayak PC Workstations
•
http://www.hp.com/go/kayakaccessories
NT Service Pack
If an NT service pack is already installed on the PC, it must be
re-installed after the card and software have been installed. When
using the HP preloaded NT 4.0 software, the latest service pack can be
found in the C:\I386\SP x directory.
On some platforms you also have to reinstall certain drivers after you
install the Service Pack. Refer to your PC documentation for more
information.
Operating System Master Diskettes
During the software installation you will need to have your operating
system master diskettes or CD-ROM available.
When using HP preloaded operating system software, the master files
can be found in the following directories:
C:\I386 (Windows NT 4.0)
•
C:\WINDOWS\OPTIONS\CABS (Windows 95 and Windows 98)
•
4 English