Loading Memory Data - Yaesu DMU-2000 Operating Manual

U
Loading Memory Data from the CF Card to the Memory on the FT-2000.
1. Press the [ F2 ( LOAD )] key to open the memory load-
ing window.
If there are multiple file names stored on the CF card,
select the desired file by pressing the [ F6 (
and [ F7 ( )] key.
2. Press the [ F3 ( GO )] key to commence loading of the
memory data to the transceiver. If you wish to cancel
the download, press the [ F2 ( CANCEL )] key.
Advice: When the ERROR message "CF CARD IS NOT
READY" appears on the display, please confirm that the
CF card is inserted correctly into its slot.
When the memory data is loaded from the CF card to the
memory on the , all previous data will be over-
written and the old data will be erased. Please remember
to save the current memory contents to the CF card, if
you want to retrieve it later.
DMU-2000 D M
M
L M
)] key
U
C
D
[ F2 ( LOAD )] Key
[ F3 ( GO )] Key
L
Page 49