Loading Memory Data - Yaesu FT DX 9000 TFT Manual

U
Loading Memory Data from the CF Card to the Memory on the FT
1. Press the [ F2 ]( LOAD ) key to open the memory
loading window.
If there are multiple file names stored on the CF
card, select the desired file by pressing the
[ F6 ]( ) key or [ F7 ]( ) key.
2. Press the [ F3 ]( GO ) key to commence loading of
the memory data to the transceiver. If you wish to
cancel the download, press the [ F2 ]( CANCEL ) key.
Advice: When the ERROR message "PLEASE
CHECK A DISK" appears on the right side of the
MEM CARD notation, please confirm that the CF card
is inserted correctly into its slot.
When the memory data is loaded from the CF card
to the memory on the
be over-written and the old data will be erased. Please
remember to save the current memory contents to
the CF card, if you want to retrieve it later.
FT 9000 TFT O
DX
SING THE
L
OADING
, all previous data will
M
PERATION ANUAL
M C
EMORY
M D
EMORY ATA
9000.
DX
Press [ F2 ]( LOAD )
Press [ F3 ]( GO )
L
HANNEL
Page 41
IST