Table of Contents
Advertisement
A
S
The RX waveform can be observed on voice and CW modes, and also can be observed on TX voice waveform allowing
optimal adjustments of setup options or filter settings.
1. Press the [ F6 ( LEVEL )] key to set the level as appro-
priate for the signal strength being monitored. Avail-
able values are:
0.3 V
0.1 V
1.0 V
2. Press the [ F7 ( SWEEP )] key to set the desired sweep
time. Available values are:
10 ms 30 ms 100 ms
Advice: When monitoring the TX waveform, turn on the
monitor feature by pressing the front panel's [ MONI ] but-
ton.
Frequency Range: 0 - 4 kHz
Sweep Speed: 10/30/100/300/1000ms (adjustable)
Time Base Indication: One frame: 10 divisions (20 gradations) "Sweep time / 20"
Signal Processing: AC Level Detection Synchronizer function
Input Level: 1 Vp-p Input (ADC Max. value)
Page 28
O
U
0.3 V ......
300 ms 1 s 10 ms ......
O
500 µ/1.5 m/5 m/15 m/50 m/DIV
O
O
SCILLOSCOPE
S
DMU-2000 D
"LEVEL" Select
"SWEEP" Select
D
ISPLAY
M
U
Hide quick links:
Advertisement
Table of Contents
