Table of Contents
Advertisement
U
Miscellaneous Functions
S
S
U
P
S
1. Press the [ F1 ( FUNC )] key to show the screen for
setup of the Marker.
2. Press the [ F4 ( P.SRCH )] key to move the marker to
the highest peak signal frequency. With each press the
[ F4 ( P.SRCH )] key, the Marker will shift to the stron-
gest signal frequency away from the current frequency.
C
T
1. Press the [ F1 ( FUNC )] key to show the screen for
setup of the Marker.
2. Press the [ F6 ( TRACE )] key to select the Trace mode
of the Spectrum Scope.
The Trace mode selections are shown below.
NORMAL AVERAGE
PEAK HOLD
The real-time signal strength will be
NORMAL:
displayed. Normally, you will want to
use this mode.
The averaged signal strength will be
AVERAGE:
displayed.
PEAK HOLD: The signal level will be displayed, with
peak strengths held for a few seconds.
If the QMB frequency is within the Spectrum Scope
sweep range, the QMB channel's frequency will be
displayed on the screen by a white arrow ( ) .
You may remove the QMB Marker from the screen
via menu item "014 diSP QMB MARKER," if de-
sired.
DMU-2000 D
M
CTR C
S
F
NORMAL ......
QMB M
U
S
D
M
[ F4 ( P.SRCH )] Key
[ F6 ( TRACE )] Key
QMB Marker
S
Page 23
Hide quick links:
Advertisement
Table of Contents
