Table of Contents
Advertisement
L
B
Up to five users may be registered into the Logbook. For use in a contest or otherwise, the settings for each operator may
be stored for later recall when that operator signs on. The operator's identification may be entered into the NAME
column; both the name and callsign may be entered.
1. Referring to Figure
[ F6 ( CONFIG )] key to engage the "CONFIG USER
SELECT MODE," then the [ F1 ( )] / [ F2 ( )] keys
to utilize the "SELECT USER" function.
2. When you want to register a new user, or change the
name of an existing user, press the [ F5 ( NAME EDIT )]
key and input the call sign and/or other information.
3. Press the [ F5 ( NAME EDIT )] key again.
4. Press the [ F6 ( SETTING )] key to engage the
"CONFIG SETTING MODE," then use the key-
board's arrow keys to navigate to the needed fields.
Please see the discussion on the next page for details
of the "CONFIG SETTING MODE" mode.
5. Press the [ F5 ( RECORD )] key to register.
If you want to un-do the registration, press [ F6 ( UN-
RECORD )] key.
Advice: If no special entry is performed, the log will reg-
ister you as "USER1."
Page 32
F
CONFIG S
on page 31, press the
C
U
S
C
S
DMU-2000 D
M
M
M
U
Hide quick links:
Advertisement
Table of Contents
