Pi Geometry Sensor View - Simrad PI50 - REFERENCE MANUAL REV A Reference Manual

G
Temperature changes
The value is shown in units per minute. The direction of the temperature change is
shown with the blue triangle. If the sensor does not detect any temperature changes,
the arrow is removed.
H : When the size of the presentation rectangle permits, a history field
History field
is shown. The field offers a graphical presentation of the sensor information for
the last 20 minutes. The vertical range is set automatically defined by the current
measurements.
Related topics
• PI Temperature/Depth sensor view on page 46
PI Temperature/Depth trend view on page 60
•
• How to set up the PI Temperature/Depth sensor on page 83
• PI Temperature/Depth purpose and application on page 181

PI Geometry sensor view

Note
This is a "dual" sensor. It will seize two communication channels on the PI50.
A
Sensor colour code, identifier and name
sensor name is the
in the
Select Sensors
The colour code is issued automatically by the PI50 system. The same colour is
used in the
Trend view
: This icons indicates with your trawl geometry is correct.
B
Geometry icon
trawl opening (or the footrope at the bottom), and each of the trawl doors or wing
328458/A
: This digit shows temperature changes recorded by the sensor.
: The identifier is the
parameter. You can control these parameters
Sensor Value Name
dialog.
and in the
History field
The sensor system makes accurate measurements of the
distances between the centre of the headrope above the
Label ID
.
Display views
parameter, the
47