Using The Keys - Simrad NX40 Installation & Operation Manual

2-1 Using the keys

Labels like
unit.
Labels like , refer to software menu items.
Units
To navigate your way through a menu list, use the cursor
keys ( ) to scroll up or down, or access submenus by
stepping left or right. In this manual, stepping though a
menu takes this form:
To access Submenu 2
> >
This means: Press the
key to step up or down to
to .
SubMenu2
Some hardware keys have secondary functions if you
hold a key down for a few moments.
Hold means to hold the key down. For example:
To power down the unit:
Hold
The internal beeper beeps when a key is pressed.
Changing data
to highlight to the data to change, then:
To change a tick box
• means On or Yes
• means Off or No.
• to change the tick box.
To select an option
• to display the list of options.
• up or down.
To change a name or number:
• to display the name or number:
• to change each character, to step across to the
next one.
• Repeat this to change other letters or numbers.
• to accept the new value. Or
changes.
, refer to the hardware keys on the
>
SubMenu1 Submenu 2
key twice, use the cursor
Submenu1
Simrad NX40/45 Installation and Operation Manual
.
, then step right
to ignore the
11