Simulate Mode; The Main Windows - Simrad NX40 Installation & Operation Manual

CAUTION
!
WARNING
!
Never have
DANGER
mode on when using the
unit to navigate on the
water.
CAUTION
14

2-6 Simulate mode

In Simulate mode, the unit ignores data from the GPS
antenna and other transducers and sensors and the unit
Simulate
generates this data itself. Otherwise, the unit functions
normally.
• There are two simulate modes:
• Normal: Allows a user to become familiar with the
unit off the water.
• Demo: Simulates a boat moving along a route and
automatically displays different unit functions.
In simulate mode, Simulate or Demo flashes at the
bottom of the window.
To activate/deactivate Simulate Mode

2-7 The main windows

To show one of the main windows full-size
Note
• The windows available depend on the optional
sensors and instruments that are installed.
• Set up commonly used windows as favorites and
press
Simrad NX40/45 Installation and Operation Manual
> >
Simulate
to switch between windows.
> >
Simulate