Simrad NX40 Installation & Operation Manual page 32

32
To enter the legs of the route:
>
7-2-2 Menu options while creating a route:
To add a waypoint to the route
To break one route leg into two:
Move the cursor to the leg you want to break >
Insert
To move a waypoint in the route
Move the cursor to the waypoint >
relocate the cursor >
To remove a waypoint from the route
Move the cursor to the waypoint >
The waypoint is removed from the route, but the waypoint
is not deleted.
To start navigating the route
To end creating the route
To delete the route
Tip: The distance and bearing calculator can also be
used to enter a course and save it as a route.
Simrad NX40/45 Installation and Operation Manual
> > Repeat as necessary. To Save: >
>
Add
> Move the cursor to the new waypoint >
>
Start
>
End
> >
Delete Yes
>
> >
Move
>
Remove