About This Manual - Simrad 38-200 COMBI W - INSTALLATION REV D Installation Manual

ABOUT THIS MANUAL

164986/D
Purpose
The purpose of this installation manual is to provide the generic
descriptions and illustrations that allows you to understand the
basic principles for echo sounder transducer installation.
Caution
Observe the maximum pulse power rating for this
transducer:
• 38 kHz: 400 W
• 200 kHz: 250 W
Maximum continuous power rating is:
• 38 kHz: 4 W
• 200 kHz: 2,5 W
DO NOT apply more power than the rated maximum!
Exceeding the power input will permanently damage
the transducer.
About the information provided in this document
The information in this document must be regarded as general
guidelines and recommendations only. The installation shipyard
must design and manufacture installation hardware to fit each
individual transducer and vessel.
Approval by maritime authorities
Whenever required, the installation shipyard must also have the
installation approved by the applicable maritime authorities.
Additional information
For additional detailed information about the transducer to
be installed, refer to the documentation provided with the
transducer. Drawings and descriptions can also be obtained from
http://www.simrad.com.
About this manual
5