Recycling - Lexmark 13B0503 - X 364dw B/W Laser User Manual

4
Press the arrow buttons until Eco-Mode appears, and then press
5
Select the setting you want, and then press
Submitting changes appears.
Adjusting Power Saver using the printer control panel
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Settings appears, and then press
4
Press the arrow buttons until General Settings appears, and then press
5
Press the arrow buttons until Timeout appears, and then press
6
Press the arrow buttons until Power Saver appears, and then press
7
Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver
mode. Available settings range from 1–240 minutes.
8
Press .
Submitting changes appears.
9
Press , and then press
Adjusting Power Saver using the Embedded Web Server
Available settings range from 1-240 minutes. The factory default setting is 30 minutes.
To increase or decrease the number of minutes before the printer enters Power Saver mode:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
4
In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
5
Click Submit.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more
information, see:
•
The Notices chapter
•
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
•
The Lexmark recycling program at www.lexmark.com/recycling
.
.
until Ready appears.
Minimizing your printer's environmental impact
.
.
.
.
37
.