Placing Separator Sheets Between Copies; Copying Multiple Pages Onto A Single Sheet - Lexmark 13B0503 - X 364dw B/W Laser User Manual

6
Press the arrow buttons until On [1,2,1,2,1,2] or Off [1,1,1,2,2,2] appears, and then press
select one.
7
Press .
8
If you placed the document on the scanner glass and have additional pages to copy, then place the next page
on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
9
Press to return to Ready.

Placing separator sheets between copies

1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
3
Click Copy Settings.
4
Click Separator Sheets.
Note: Collate must be On for the separator sheets to be placed between copies. If Collate is Off, then the separator
sheets are added to the end of the print job.
5
Select one of the following:
•
Between pages
•
Between copies
•
Between jobs
6
Click Submit.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single
sheet of paper.
Notes:
•
The Paper Size must be set to Letter, Legal, A4, or B5 JIS.
•
The Copy Size must be set to 100%.
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Copy button.
4
Press the Options button.
5
Press the arrow buttons until Paper Saver appears, and then press
Copying
75
.
to