Printing Information Pages - Lexmark 13B0503 - X 364dw B/W Laser User Manual

Printing information pages

See "Printing a menu settings page" on page 25 and "Printing a network setup page" on page 25 for more information
on printing these pages.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Print Fonts appears, and then press
5
Press the arrow buttons until PCL Fonts or PostScript Fonts appears, and then press
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Print Directory appears, and then press
After the directory list prints, Ready appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the arrow buttons until Prt Quality Pgs appears, and then press
The print quality test pages print.
5
Press the arrow buttons until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
.
.
while turning the printer on.
.
.
Printing
66
.
.
.
.
.