Source or process
Two-sided printing
from trays
One-sided printing
using the multipurpose
feeder or manual feeder
Two-sided printing
using the multipurpose
feeder or the manual
feeder
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Tips on using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
Print side
Printed letterhead
design is placed faceup.
Preprinted letterhead
design is placed faceup.
Preprinted letterhead
design is placed
facedown.
Paper orientation
The top edge of the sheet with the logo is placed at the front of the
tray.
The top edge of the sheet with the logo should enter the
multipurpose feeder or manual feeder first.
The top edge of the sheet with the logo should enter the
multipurpose feeder or manual feeder last.
Printing
63