Insufficient Memory To Collate Job; Memory Full; Defective Flash Detected; Not Enough Free Space In Flash Memory For Resources - Lexmark 13B0503 - X 364dw B/W Laser User Manual

37 Insufficient memory to collate job

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
and begin collating the rest of the print job.
•
Cancel the current print job.

38 Memory full

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Cancel the current print job.
39 Complex page, some data may not have printed
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Cancel the current print job.

51 Defective flash detected

Try one or more of the following:
•
Replace the defective flash memory card.
•
Press the arrow buttons until Continue appears, and then press

52 Not enough free space in flash memory for resources

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Network <x> software error
The printer detects that a network port is installed, but cannot communicate with it. The printer disables all
communication to the associated network interface.
to print the portion of the job already stored
Troubleshooting
181
to clear the message.
to clear the message and continue printing.
to clear the message and continue printing.
to stop the defragment operation and
to continue printing.