Connecting To An Analog Telephone Line; Connecting To A Dsl Service - Lexmark 13B0503 - X 364dw B/W Laser User Manual

Equipment and service options
Connect directly to the telephone line
Connect to a Digital Subscriber Line (DSL or ADSL) service
Connect to a Private Branch eXchange (PBX) or Integrated
Services Digital Network (ISDN) system
Use a Distinctive Ring service
Connect to a telephone line, telephone, and answering
machine
Connect through an adapter used in your area
Connect to a computer with a modem

Connecting to an analog telephone line

If your telecommunications equipment uses a US-style (RJ11) telephone line, then follow these steps to connect the
equipment:
1
Connect one end of the telephone cable that came with the printer to the printer LINE port .
2
Connect the other end of the telephone cable to an active analog telephone wall jack.

Connecting to a DSL service

If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then
follow these steps to connect the equipment:
1
Connect one end of the telephone cable that came with the printer to the printer LINE port .
2
Connect the other end of the telephone cable to the DSL filter.
Note: Your DSL filter may look different than the one in the illustration.
Fax connection setup
See "Connecting to an analog telephone line" on
page 84
See "Connecting to a DSL service" on page 84.
See "Connecting to a PBX or ISDN system" on page 85.
See "Connecting to a distinctive ring service" on page 85.
See "Connecting the printer and a telephone or answering
machine to the same telephone line" on page 86
See "Connecting to an adapter for your country or region"
on page 87.
See "Connecting to a computer with a modem" on
page 91.
Faxing
84