Standard Network Software Error; Standard Usb Port Disabled; Too Many Flash Options Installed; Too Many Trays Attached - Lexmark 13B0503 - X 364dw B/W Laser User Manual

Try one or more of the following:
•
Press to clear the message and continue printing.
•
Turn the power off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.

54 Standard network software error

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.

56 Standard USB port disabled

Try one or more of the following:
•
The printer discards any data received through the USB port. Press
•
Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Try one or more of the following:
•
Turn the printer off, and then remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
•
Press to clear the message and continue printing.

58 Too many trays attached

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

84 PC Kit life warning

The photoconductor kit is near exhaustion.
Try one or more of the following:
•
Replace the photoconductor kit.
•
Press to clear the message and continue printing.
Troubleshooting
182
to continue printing.
to clear the message and continue printing.