Warping Amp Channels Together; Save The Hypermodel - DigiTech GNX4 Owner's Manual

Warping Amp Channels Together

When the Amps and Cabinets in Channel 1 and Channel 2 are dialed in to suit your taste, we can Warp
their characteristics together to create a new HyperModel. To warp the amps do the following:
1. Press the GENETX Amp Control button.
2. Rotate Knob 3 (Warp) knob to blend the Amps and Cabinets together to create a new unique amp.

Save the HyperModel

Now that we have designed our own Amp/Cabinet HyperModel, we need to save it to one of the 9 User
HyperModel locations. This allows us to use it in presets. To save the HyperModel, do the following:
1. Press the AMP SAVE button until the display reads
this example, let's name the HyperModel "Rectweed" (Rectified Tweed).
2. Rotate the DATA WHEEL to select R as the first letter.
3. Press the NEXT ARROW button to select the next character in the display. Continue using the
DATA WHEEL and NEXT ARROW button until the display reads
4. When the display reads
5. Now we need to choose one of the 9 User HyperModel locations. Use the DATA WHEEL to select
a an empty user location. The display should read
read if this is the first HyperModel stored to your GNX4.
6. Press the AMP SAVE button again to save to this Amp location. The display briefly reads
(Amp Saved) and then returns to the name of the selected preset.
™
, press the AMP SAVE button again.
Creating a Preset
and the first letter ( ) is flashing. For
.
(Empty) and the red numeric display should
53