Warp The Green And Red Channels Together; Save The Hypermodel; Select Models For The Preset Channels - DigiTech GENESIS3 User Manual

Genetx guitar processor

Table of Contents

Tutorial

Warp the Green and Red Channels Together

When we have the Amps and Cabinets in our Green and Red Channels dialed in to suit our taste, we can Warp

them together to create our new HyperModel™. Rotate the WARP knob to achieve the desired blend of the

Amps and Cabinets in our Green and Red Channels.

Now that we have designed our own Amp/Cabinet HyperModel™, we need to save our creation to one of the 9

User HyperModel™ locations.This will enable us to use it in Presets. Press the AMP SAVE button once.The

Display will read NEWAMP (New Amp) and the first letter (N) will be flashing.This is asking us to name the new

HyperModel™. For the sake of this example, let's name the HyperModel™ "Rectwd" (Rectified Tweed). Rotate the

DATA knob to select R as the first letter. Use the EDIT button to select the next character in the Display.This

character should already be an E because we started out with the name "NEWAMP." If it is not an E, rotate the

DATA knob to select E as the character. Continue to use the EDIT button to select the next character location

in the Display, and rotate the DATA knob to select the alphabetic characters until the Display reads RECTWD.

Then press the AMP SAVE button again.This will take us to the second step of saving a HyperModel™, which is

choosing one of the 9 User HyperModel™ locations.The alpha-numeric Display should read EMPTY (Empty) and

the red numeric Display should read U1 because this is the first HyperModel™ stored to your Genesis3. Press the

AMP SAVE button again to store this new creation to this Amp location.The Display will briefly read AMPSVD

(Amp Saved) and then return to showing the name of the currently selected Preset.

In the previous steps, we assigned a Tweed to the Green Channel and a Rectified Model to the Red Channel.Then we

Warped the two together to create our HyperModel™.This HyperModel™ is now saved as an amp type that we

named Rectwd, but it is not currently a part of our Preset. In this example Preset, we were going to have the ability to

toggle between an acoustic guitar simulation and our new HyperModel™.To do this we need to select the acoustic

model for the Green Channel and our new Rectwd to the Red Channel of our Preset. Press the WARP knob until

the Amp Parameter LEDs are Green. Now rotate the AMP MODEL knob until the Display reads ACOUST. Now

press the WARP knob again and the Amp Parameter LEDs will light red. Rotate the AMP MODEL knob until the

Display reads RECTWD (our new HyperModel™).We will now be able to toggle between these two sounds without

changing Presets.

Table of Contents

Genesis 3