Table of Contents
Advertisement
Format
To quickly erase and format a Compact Flash memory card, the GNX4's setup menu provides a format
function. If a Compact Flash memory card is not present in the Compact Flash memory card slot, the
format function is not available. To format a Compact Flash memory card, follow these steps:
1. Press the SONG SETUP button until the display reads
button will begin flashing prompting the user to press it to begin formatting.
2. Press the RECORD button. The display reads
begin the memory erase procedure. To abort, press EXIT.
3. Pressing the RECORD button a second time will begin the formatting procedure. The GNX4's
main display reads
during this procedure.
4.Then GNX4 will display
recording after the GNX4 returns to the preset screen. Do not remove your CF card or turn
the GNX4's power off while the display reads
Using Compact Flash Memory Cards
The GNX4 recorder's memory can be increased by using an optional, external Compact Flash memory card.
On the back panel is a card slot for adding memory. The GNX4 supports memory cards from 32MB
(Megabyte) to 2GB (Gigabyte) in size.
To utilize a Compact Flash memory card in the GNX4, it must be formatted using the FAT16
File format. DigiTech recommends that you format your card in the GNX4 using our internal format
routine. Our internal format routine will configure the card as FAT16. You can also format a card on a PC
using Windows
®
2000 or XP but you MUST select the File System to be FAT (meaning FAT16) instead of
FAT32 and enable the Quick Format option. If a card is formatted using FAT32 and installed into the GNX4
you will be prompted to format it (
card that is unrecognizable for any other reason.
NOTE: The GNX4 is compatible with Type I Compact Flash cards only. It is not compatible
with Type II cards or IBM/Hitachi Microdrives
The table listed below shows the amount of record time each of the currently available cards will provide:
Card Size
32MB
64MB
128MB
256MB
512MB
1GB
2GB
To use an external memory card with the GNX4, follow these steps:
1. Place the card into the MEMORY CARD slot with the finger grip facing down fully engaging the card.
The GNX4's 8-Track Recorder
during this time and the GNX4's buttons and footswitches are disabled
until the formatting process is complete. You can begin
). The GNX4 will also prompt the user to format (
Recording Time
6 track minutes
12 track minutes
24 track minutes
48 track minutes
1 hour and 36 track minutes
3 hour 12 track minutes
6 hours 24 track minutes
Finger Grip
Side Down
, prompting the user that the next press will
or you may lose files.
™
.
. The recorder's RECORD
) a
75
Advertisement
Table of Contents
