Do you have a question about the GNX4 and is the answer not in the manual?
Questions and answers
игорь
March 16, 2025
как вернутся к заводским настройкам
1 comments:
Mr. Anderson
March 16, 2025
To reset the DigiTech GNX4 to its factory settings, follow these steps:
1. Press the UTILITY button (its LED will light up). 2. Use the NEXT button to select RESET ?, and the STORE button will start flashing. - To cancel, press the EXIT button. 3. Press the STORE button once; the display will show CONFIRM?. 4. Press the STORE button again; the display will show FACRESET and then TOE DowN. 5. When the display reads TOE DowN, move the Expression Pedal forward (toe down) and press the flashing Footswitch 4. 6. When the display reads TOE UP, continue recalibrating the Expression Pedal.
Note: This process erases all user presets and settings but does not erase content on a Compact Flash card if installed.
Need help?
Do you have a question about the GNX4 and is the answer not in the manual?
Questions and answers
как вернутся к заводским настройкам
To reset the DigiTech GNX4 to its factory settings, follow these steps:
1. Press the UTILITY button (its LED will light up).
2. Use the NEXT button to select RESET ?, and the STORE button will start flashing.
- To cancel, press the EXIT button.
3. Press the STORE button once; the display will show CONFIRM?.
4. Press the STORE button again; the display will show FACRESET and then TOE DowN.
5. When the display reads TOE DowN, move the Expression Pedal forward (toe down) and press the flashing Footswitch 4.
6. When the display reads TOE UP, continue recalibrating the Expression Pedal.
Note: This process erases all user presets and settings but does not erase content on a Compact Flash card if installed.
This answer is automatically generated