Table of Contents
Advertisement
3. TRANSPORT – The 6 transport buttons just below the displays are used for the record, playback, and
search functions of recorded material. They include STOP, RECORD, PLAY,
REWIND, FAST FORWARD, and UNDO.
4.TRACKS – A Track is an individual memory location in a song that you record audio to. The GNX4 has
eight individual tracks that can be recorded to.
5. DRUMS/MP3 – This button is used to start the GNX4's drum machine when the recorder begins
playing. When the button is lit green, the drum machine will playback the pattern or
MIDI file selected in the Song Setup menu. When this button is lit yellow, an MP3 file has
been selected in the Song Setup menu to start playing when the recorder begins playing.
(See the Song Setup section on page 70.) When this button is lit red, the selected
pattern, MIDI file, or MP3 file can be recorded to a track if one of the proper recorder
sources is selected. (See the (Compact Flash) CF/USB 1-2 Source section on page
64.)
6. LEVEL – Accesses the playback level for each track.
7. PAN – Accesses the pan controls for each track.
8. MASTER – This controls the stereo output playback level of tracks recorded on the Compact Flash card.
9. REMAIN – When this button is enabled, the TIME display shows the remaining recording time available
in track minutes when the recorder is stopped. When the recorder is playing back tracks, the
display shows the amount of time remaining in the current song.
10. CF STORAGE – This button is to be pressed first when files are to be copied to and from the
Compact Flash card and your computer's hard drive. When this button is engaged, the
compact flash card will appear as a new drive on your computer allowing files to be
transferred back and forth. Since file transferring will use up some USB bandwith, it is
not recommended that you record audio to the computer when this is active.
11. SONG SETUP – Accesses setup options for each song including Click Track, Tempo, Pre-Roll, Song
12. SHIFT – When this button is lit, the secondary functions labeled below each button are now active.
a. MIC - Selects the mic input routing menu and how the mic signal is routed through the
b. LINE - Selects the line input routing menu and how both line inputs are routed through the
c. CF/USB 1-2 SOURCE - Selects what inputs are to be recorded to the onboard recorder
d. USB 3-4 SOURCE - Selects what inputs are to be recorded up the USB 3-4 channels.
e. USB PLAY MIX - Controls the level balance between the GNX4's processing and the USB
f. CF/USB 1-2 LVL - A gain/attenuation control to optimize the level of sources being
g. USB 3-4 LVL - A gain/attenuation control to optimize the level of sources being recorded
The GNX4's 8-Track Recorder
Repeat, and more. See more about the Song Setup options in the next section.
GNX4's effects processing for both recording and performance.
GNX4's effects processing for both recording and performance.
or up the USB 1-2 channels.
stream played back from your computer.
recorded to the Compact Flash card and up the USB 1-2 channel.
up the USB 3-4 channel.
69
Advertisement
Table of Contents
