CAUTION:
Pressing the center section of the fan can damage the blades. Press only the outer edge
of the fan.
Installing the component
1.
Align the guidepost on the new fan with the power supply connector (1).
2.
Slide the replacement fan into the fan base (2) until the tabs snap into place (3).
Verifying proper operation
After replacing the fan module, verify that:
•
The fan starts operating immediately.
•
The fan LED is On.
•
No new error messages are displayed on the array controller LCD panel.
2
3
2
1
1
15555
1
3
15556
maintenance and service guide
89