HP 201723-B21 - StorageWorks Modular SAN Array 1000 Hard Drive Maintenance And Service Manual page 46

Modular smart array
Hide thumbs Also See for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive:
Table of Contents

Advertisement

Message
81 SMART DRIVE
ALERT BOX #<n>,
BAY <n>
82 DRIVE HOT ADDED
BOX #<n>, BAY <n>
83 DRIVE HOT
REMOVED BOX #<n>,
BAY <n>
84 DRIVE FAILURE
BOX #<n>, BAY <n>
85 BAD DRIVE
FRMWARE BOX #<n>,
BAY <n>
86 DRIVE POSITION
CHANGE DETECTED
87 DRIVE POSITION
CHANGE INVALID
88 NON-COMPAQ DRIVE
BOX #<n>, BAY <n>
46
LCD panel and message descriptions
Type
Description
Informational
A SCSI hard drive may be
close to failing. This was
determined either by the
hard drive firmware itself
using SMART technology or
by the array controller using
monitor and performance
testing.
Informational
A SCSI hard drive has
been added to the MSA
chassis or attached external
storage enclosure.
Informational
A SCSI hard drive has been
removed from the MSA
chassis or attached external
storage enclosure.
Error
A SCSI hard drive in the
MSA chassis or attached
external storage enclosure
has failed. If the hard drive
was part of a configured
volume, then the state of the
volume will depend on the
fault tolerance used.
Error
A SCSI hard drive has
been detected that has
known, bad firmware on it.
Continued use of this hard
drive could result in hard
drive failure, decreased
performance, or data loss.
Informational
The SCSI hard drives that
make up a configured
volume have been
physically moved within
the MSA1000 chassis or
attached external storage
enclosure. The array
controller has updated its
configuration information
accordingly.
Informational
The SCSI hard drives that
make up a configured
volume have been
physically moved in such a
way that the array controller
can no longer access the
configured volume.
Informational
An unsupported hard
drive was located in the
indicated bay of the storage
enclosure.
Action
The hard drive should
be replaced as soon as
possible.
The hard drive should
be replaced as soon as
possible.
Either the hard drive firmware
should be updated or
the hard drive should
be replaced as soon as
possible.
The MSA should be powered
off and the hard drives
restored to their original
positions.

Advertisement

Table of Contents
loading

This manual is also suitable for:

353803-b22 - storageworks modular smart array 1000 san starterStorageworks 1000 - modular smart arrayStorageworks 1000

Table of Contents