3.
While lifting up the power supply module latch (1), grasp the fan element and pull the defective
power supply assembly out of the chassis (2).
Installing the component
1.
Lift up on the power supply module latch (1) and slide the assembly into the chassis until it is fully
seated (2).
2.
Connect the AC power cord to the power supply.
3.
Engage the cord lock.
Verifying proper operation
After replacing the power supply, verify that:
•
The power supply LED is solid green.
•
No new error messages are displayed on the array controller LCD panel.
1
2
15557
1
2
15558
maintenance and service guide
87