1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Computer Hardware
  5. KIWI330
  6. User manual

AXIOMTEK KIWI330 User Manual

Intel atom alder lake n processor 1.6” board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KIWI330
®
®
Intel
Atom
Alder Lake N Processor
1.6" Board
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KIWI330 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK KIWI330

Summary of Contents for AXIOMTEK KIWI330

  • Page 1 KIWI330 ® ® Intel Atom Alder Lake N Processor 1.6” Board User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Esd Precautions

    It discharges static electricity from your body. ◼ Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® ® Intel and Celeron are trademarks of Intel Corporation.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii ESD Precautions ................... iii Section 1 Introduction ..........1 Features ....................1 Specifications ..................2 Utilities ....................3 Block Diagram ..................4 Section 2 Board and Pin Assignments ....5 Board Dimensions and Fixing Holes ..........5 Board Layout ..................
  • Page 5 Navigation Keys ................27 Main Menu ..................29 Advanced Menu ................. 30 Chipset Menu ..................44 Security Menu ..................48 Boot Menu ..................51 Save & Exit Menu ................52...
  • Page 6 This page is intentionally left blank.

  • Page 7: Introduction

    4GB LPDDR5 memory, and 64GB NVMe SSD, it ensures high efficiency and fast data processing. The KIWI330 is equipped with Alder Lake CPU on board, it also features 4GB LPDDR5 RAM and 64GB NVMe on board. With M.2 Key E for wireless expansion, eDP and Type C-DP support for display connectivity, it can be expanded into a MIO board required by various scenarios through the Type-C connector.

  • Page 8: Specifications

    KIWI330 1.6” Board Specifications ⚫ ® ® ◼ Intel Atom Alder Lake N dual core processor (1.0GHz) ⚫ System Memory ◼ Onboard 4GB LPDDR5 ⚫ Storage ◼ Onboard NVMe 64GB PCIe Gen3 x2) ⚫ BIOS ◼ AMI UEFI BIOS ◼...

  • Page 9: Utilities

    KIWI330 1.6” Board ⚫ Power Management ◼ ACPI (Advanced Configuration and Power Interface) ⚫ Form Factor ◼ 1.6” form factor All specifications and images are subject to change without notice. Note Utilities ⚫ Chipset driver ⚫ Graphic driver ⚫ ME driver ⚫...

  • Page 10: Block Diagram

    KIWI330 1.6” Board Block Diagram Introduction...

  • Page 11: Board And Pin Assignments

    KIWI330 1.6” Board Section 2 Board and Pin Assignments Board Dimensions and Fixing Holes Top View Board and Pin Assignments...
  • Page 12 KIWI330 1.6” Board Bottom View Board and Pin Assignments...

  • Page 13: Board Layout

    KIWI330 1.6” Board Board Layout Top View Board and Pin Assignments...
  • Page 14 KIWI330 1.6” Board Bottom View Board and Pin Assignments...

  • Page 15: Assembly Drawing

    For thermal dissipation, a heatsink enables the KIWI330’s components to dissipate heat efficiently. All heat generating components are thermally conducted to the heatsink in order to avoid hot spots. Images below illustrate how to install the thermal solution on KIWI330. Board and Pin Assignments...

  • Page 16: Switch Settings

    KIWI330 1.6” Board Switch Settings Properly configure switch setting on the KIWI330 to meet your application purpose. Below you can find a summary table of onboard default settings. Once the default switch setting needs to be changed, please do it under power-off condition.

  • Page 17: Connectors

    KIWI330 1.6” Board Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table of connectors on the hardware.

  • Page 18: Edp Connector (Cn1)

    KIWI330 1.6” Board 2.5.1 eDP Connector (CN1) The embedded DisplayPort (eDP) interface is available through 30-pin connector (IPEX-20453-030T-01), which is compliant with I-PEX-CABLINE II HT1 20143. Signal Signal +12V_EDP_BKLT +12V_EDP_BKLT eDP_VCCM +12V_EDP_BKLT eDP_VCCM +12V_EDP_BKLT eDP_AUX_DN eDP_AUX_DP eDP_BKLT_CTL eDP_BKLT_EN eDP_TX0_P eDP_TX0_N...

  • Page 19: Key E Connector (Cn4)

    KIWI330 1.6” Board 2.5.4 M.2 Key E Connector (CN4) The board comes with a M.2 2230 Key E connector. It is suggested to install the M.2 wireless module via PCIe x1 and USB 2.0 with 22mm width and 30mm length.

  • Page 20: Usb 3.2 Gen2 Type C Vertical Connector (Cn5)

    KIWI330 1.6” Board 2.5.5 USB 3.2 Gen2 Type C Vertical Connector (CN5) The board comes with a USB 3.2 Gen 2 Type-C port, which is compliant with USB 3.2 Gen2 (10 Gbps) and mounted in a vertical orientation on the circuit board. You can connect expansion MIO modules using this Type-C connector.

  • Page 21: Alt Mode Type C Connector (Cn8)

    KIWI330 1.6” Board 2.5.7 ALT Mode Type C Connector (CN8) The board comes with a USB Type-C connector that supports Alternate Mode (ALT Mode), enabling the transmission of non-USB signals such as DisplayPort, while also supporting high-speed data transfer and power delivery.

  • Page 22: Usb 2.0 Wafer Connector (Cn10)

    KIWI330 1.6” Board 2.5.9 USB 2.0 Wafer Connector (CN10) This is a 4-pin wafer connector for installing versatile USB 2.0-compliant interface peripherals, supporting data transfer speeds of up to 480 Mbps. Note that we also offer a USB wired cable (PN：594P8802810E). If you wish to purchase it, please contact your sales representative.

  • Page 23: Hardware Description

    Make sure all the correct settings are arranged for your installed microprocessor to prevent the CPU from damage. BIOS The KIWI330 uses AMI Plug and Play BIOS with a single 256Mbit SPI Flash. System Memory The KIWI330 supports onboard LPDDR5 4GB memory.

  • Page 24: I/O Port Address Map

    KIWI330 1.6” Board I/O Port Address Map Hardware Description...

  • Page 25: Interrupt Controller (Irq) Map

    KIWI330 1.6” Board Interrupt Controller (IRQ) Map The interrupt controller (IRQ) mapping list is shown below: Hardware Description...
  • Page 26 KIWI330 1.6” Board Hardware Description...
  • Page 27 KIWI330 1.6” Board Hardware Description...
  • Page 28 KIWI330 1.6” Board Hardware Description...
  • Page 29 KIWI330 1.6” Board Hardware Description...
  • Page 30 KIWI330 1.6” Board Hardware Description...

  • Page 31: Memory Map

    KIWI330 1.6” Board Memory Map The memory mapping list is shown below: Hardware Description...
  • Page 32 KIWI330 1.6” Board This page is intentionally left blank. Hardware Description...

  • Page 33: Ami Bios Setup Utility

    KIWI330 1.6” Board Section 4 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This section provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility.
  • Page 34 KIWI330 1.6” Board Hot Keys Description → Left/Right The Left and Right <Arrow> keys allow you to select a setup screen. The Up and Down <Arrow> keys allow you to select a setup screen or  Up/Down sub-screen. The <Enter> key allows you to display or change the setup option listed for a Enter particular setup item.

  • Page 35: Main Menu

    KIWI330 1.6” Board Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.

  • Page 36: Advanced Menu

    KIWI330 1.6” Board Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 37 KIWI330 1.6” Board ⚫ PCH DIO Configuration Use this screen to set parameters related to digital I/O configuration. DIO Modification Enable or disable digital I/O modification. If modification is disabled, the DIO status sub screen is as follows: Once it is enabled, you can access the DIO status sub screen to set output or input, see image below.
  • Page 38 KIWI330 1.6” Board ⚫ ACPI Settings You can use this screen to select options for the ACPI configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 39 KIWI330 1.6” Board ⚫ Trusted Computing This screen provides function for specifying the TPM settings. Security Device Support Enable or disable BIOS support for security device, typically a TPM. When enabled (default setting), the BIOS initializes and makes the TPM available for use by the operating system and other system components.
  • Page 40 KIWI330 1.6” Board Storage Hierarchy Enable or disable storage hierarchy, used to manage keys and operations related to data storage. Endorsement Hierarchy Enable or disable endorsement hierarchy, used to manage keys and operations related to the TPM's endorsement keys. Physical Presence Spec Version This setting allows you to select the version of the Physical Presence Interface (PPI) Specification: Spec Version 1.2 or 1.3.
  • Page 41 KIWI330 1.6” Board ⚫ Platform Misc Configuration Use this screen to configure platform-related features. Native PCIE Enable Enable or disable OS to control below features: Hot Plug, SHPC Native Hot Plug control, Power Management Events, PCIe Advanced Error Reporting control, PCIe Capability Structure control and Latency Tolerance Reporting control.
  • Page 42 KIWI330 1.6” Board ⚫ CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option. Hardware prefetcher To turn on/off the MLC (Mid-Level Cache) streamer prefetcher. Adjacent Cache Line Prefetch To turn on/off prefetching adjacent cache lines.
  • Page 43 KIWI330 1.6” Board Enable or disable AES (Advanced Encryption Standard). Boot performance mode Select the performance state that the BIOS will set starting from reset vector. The options are: Max Battery Max Non-Turbo Performance Turbo Performance Intel(R) Speed Shift Technology Enable or disable Intel(R) Speed Shift Technology support.
  • Page 44 KIWI330 1.6” Board ⚫ NVMe Configuration This screen shows related information and settings for NVMe (Non-Volatile Memory Express) storage device. AMI BIOS Setup Utility...
  • Page 45 KIWI330 1.6” Board ⚫ NCT7802Y HW Monitor This screen monitors hardware health status. This screen displays the temperature of system and CPU, fan speed in RPM and system voltage (VCC). AMI BIOS Setup Utility...
  • Page 46 KIWI330 1.6” Board ⚫ NCT7802Y Smart Fan Configuration There are two modes: “FAN MANUAL CONTROL” and “FAN SMART IV MODE”. NCT7802Y Smart Fan1 Config In FAN MANUAL CONTROL, the fan speed is controlled by fan PWM duty, and the range is from 0 to 255.
  • Page 47 KIWI330 1.6” Board In FAN SMART IV MODE, the fan speed is controlled by T1(temperature level1)/F1(fan duty 1), T2(temperature level2)/F2(fan duty 2) and T3(temperature level3)/F3(fan duty 3). Please base on the specification of the fan to set these parameters. We suggest that the range of fan duty is from 120 to 255.
  • Page 48 KIWI330 1.6” Board ⚫ USB Configuration USB Devices Display all detected USB devices. AMI BIOS Setup Utility...
  • Page 49 KIWI330 1.6” Board ⚫ SOC I2C WDT Configuration SOC I2C WDT Enable or disable SOC I2C WDT function. Mode Set the SOC I2C WDT mode: Minute or Second. Timer Timer countdown. AMI BIOS Setup Utility...

  • Page 50: Chipset Menu

    KIWI330 1.6” Board Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► System Agent (SA) Configuration ►...
  • Page 51 KIWI330 1.6” Board System Agent (SA) Configuration ⚫ This screen allows users to configure System Agent (SA) parameters. System Agent (SA) configuration options: VT-d Control Iommu Pre-boot Behavior Above 4GB MMIO BIOS assignment Graphics Configuration VT-d Enable or disable the VT-d (Intel Virtualization Technology for Directed I/O) function. The default setting is Enabled.
  • Page 52 KIWI330 1.6” Board Above 4GB MMIO BIOS assignment Enable or disable above 4GB Memory Mapped IO BIOS assignment. This is enabled automatically when Aperture Size is set to 2048MB. AMI BIOS Setup Utility...
  • Page 53 KIWI330 1.6” Board Graphics Configuration ⚫ Internal Graphics Use this item to set parameters related to internal graphics controller. AMI BIOS Setup Utility...

  • Page 54: Security Menu

    KIWI330 1.6” Board Security Menu The Security menu allows users to change the security settings for the system. ⚫ Administrator Password Set administrator password. ⚫ User Password Set user password. ⚫ Secure Boot Use this item to set parameters related to Secure Boot.
  • Page 55 KIWI330 1.6” Board ⚫ Secure Boot The Secure Boot feature is designed to ensure and protect the system from unauthorized access and malwares during boot-up. Secure Boot Secure Boot feature is Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode.
  • Page 56 KIWI330 1.6” Board ⚫ Key Management Factory Key Provision Enable or disable provision factory default keys on next reboot only when System in Setup mode. Restore Factory Keys Force System to User mode. Install factory default Secure Boot key databases.

  • Page 57: Boot Menu

    KIWI330 1.6” Board Boot Menu The Boot menu allows users to change boot options of the system. ⚫ Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. ⚫ Bootup Numlock State Use this item to select the power-on state for the keyboard Numlock.

  • Page 58: Save & Exit Menu

    KIWI330 1.6” Board Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. ⚫ Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 59 KIWI330 1.6” Board ⚫ Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes. ⚫ Restore Defaults It automatically sets all Setup options to a complete set of default settings when you select this option.

Table of Contents