HOOKE ROAD TKM.10022 Quick Start Manual

Bed rack bracket

Download this manual

Bed Rack Bracket

(1) Contents:

Qty

Part Name

Bed Rack Bracket Assembly

H×24

Button Head Socket Cap Bolts Screws

I×12

Carriage Bolts

Size(mm)

Qty

Part Name

J×24

Split Lock Washer

M10*25

K×36

Flat Washer

M10*25

L×24

Nylon Insert Lock Nut

TKM.10022

M10*20*1

Size(mm)

D10

M10

Need help?

Do you have a question about the TKM.10022 and is the answer not in the manual?

Page 1 TKM.10022 Bed Rack Bracket (1) Contents: Part Name Size(mm) Part Name Size(mm) Bed Rack Bracket Assembly J×24 Split Lock Washer H×24 Button Head Socket Cap Bolts Screws M10*25 K×36 Flat Washer M10*20*1 I×12 Carriage Bolts M10*25 L×24 Nylon Insert Lock Nut...
Page 2 About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (TKM.10022), please scan the QR code.
Page 3 Move the assembled bed rack to the bed for your Tacoma. Notes: The bracket is only used the bed rack with the Hooke Road bed rack system. You can use the bed rack and a folding truck bed tonneau cover (most cover not all cover have been tested) with these brackets.
Page 4 Step3: Put Part “C” into the rail and tighten those bolts（Parts "H", "L", "K" and "J"）.
Page 5 Step 4: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.