Related Manuals for HOOKE ROAD BXG.3014
Summary of Contents for HOOKE ROAD BXG.3014
- Page 1 Roof Rack BXG.3014 (1) Contents: (2) Tools required: a.5 mm Hex Socket Wrench b.4 mm Hex Socket Wrench...
- Page 2 About 2 hours, 3-4 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.3014), please scan the QR code.
- Page 3 (4) Installation instruction: Step 1: Place the PART “A”, “B”, “C”, and “D” as the picture shown. Then assemble these parts.
- Page 5 Step 2: The same operation for the passenger side. Step 3: Assemble the PART “E”, and “F”.
- Page 6 Step 4: Place the combination of PART “E” and ”F” into the car roof. Step 5: Place the rack into the car roof. Then assemble the rack with the four brackets.
- Page 8 Step 6: Adjust the positions of the parts until the rack was in an ideal position! Then tighten up all the screws. Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality product!
- Page 9 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...
Need help?
Do you have a question about the BXG.3014 and is the answer not in the manual?
Questions and answers