Page 1
MMR.30016 Security Deck Enclosure (1) Contents: Part Name Size(mm) Part Name Size(mm) Security Deck Enclosure Assembly L×6 Plastic Washer M6.2×11×4 H×14 Button Head Socket Cap Screw M×4 Flat Washer M6×12 M8×20 I×2 Button Head Socket Cap Screw N×20 Flat Washer M6×16...
Page 2
About 1-2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (MMR.30016), please scan the QR code.
(4) Installation instruction: Step 1: Put down the rear seat. Step 2: Install the Part”F” with original bolts and Assemble the Part ”D1”, “D2” & “E1”, “E2” with the Part “ H”, “J”, “N”, “K”, “AA”.
Page 4
Step3: Assemble the Part ”C” & “D1”, “D2” with the Part “ H”, “J”, “N”, “K”.
Page 5
Step 4: Install the Part ”G” into the Part “A” with the Part “L”, “K”. Assemble the Part “A” & the Part “C” with the Part “I”, “L”, “M”, “K”.
Page 6
Install the Part “B” Install the black rubber strip with the glue.
Page 7
Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.