Page 2
About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.3018), please scan the QR code.
Page 3
(4) Installation instruction: Step 1: Remove the original front bumper.
Page 4
Step 2: Install the PART”Y” on the vehicle.(JL & JK)
Page 5
Step 3: Tighten the bumper(PART”Y”).(JL & JK are the same installation method) (1)Install the PART”B”,PART”C”,PART”D” on the red circle bolt holes.
Page 6
(2)Install the PART”A”,PART”C”,PART”D” on the yellow circle bolt holes. Step 4: Repeat above steps for another side.
Page 7
Step 5: Install the PART”Z” on the PART”Y”.(JL & JK) Step 6: Installation completed.
Page 8
1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...