Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PXM PX165-IP-TH
Summary of Contents for PXM PX165-IP-TH
- Page 1 PX165-IP-TH Splitter DMX IP TH User manual...
-
Page 2: Table Of Contents
6 Device update....................8 7 Connection scheme..................9 8 Dimensions....................10 9 Technical data....................11 Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-0 BDO register number 000005972 www.pxm.pl... -
Page 3: Description
DMX track using a splitter was created. With the PX165-IP-TH you can split the input DMX signal into 4 independent branches. The individual output lines are galvanically separated from both the input and from each other. -
Page 4: Safety Conditions
Safety conditions PX165-IP-TH s a device powered with safe voltage up to 12 – 24V DC; however, during its installation and use the following rules must be strictly observed: 1. The device may only be connected to 12 – 24V DC (stabilized voltage) with current-carrying capacity compatible with technical data. -
Page 5: Connectors And Control Elements
Connectors and control elements DMX outputs signal diode power supply (12 - 24V DC) DMX THRU DMX IN DMX – DMX + 12 - 24V DC DMX + DMX –... -
Page 6: Connecting The Dmx Signal
DMX IN connector on the PX165-IP-TH and then from the DMX THRU connector to the next DMX receivers. If the PX165-IP-TH is the last device in the DMX line (there is no receiver connected to the DMX THRU output), a terminator – a 120 Ohm resistor –... - Page 7 max. 32 devices (including splitters) max. 4 splitters in cascade max. 32 devices (including splitters)
-
Page 8: Indicator Lights
Indicator lights There are diodes on the device housing that indicate the operating status of the device. Action Function the device does not receive the DMX green diode flash every ~3s signal green diode flash every ~1s the device receives a DMX signal Device update The update is possible using the PX313 USB/RS485 In... -
Page 9: Connection Scheme
Connection scheme PX715 4x700 mA/48V cables protected against moisture power supply 12 - 24V DC PX715 4x700 mA/48V terminator PX715 4x700 mA/48V terminator DMX controller i.e. PX333 to other devices or terminated with a terminator (protected against moisture) Wires: • power supply: ◦... -
Page 10: Dimensions
Dimensions NOTE! Remember to leave at least 1.5 cm for cables connected to the device using plugs. -
Page 11: Technical Data
Technical data type PX165-IP-TH power supply 12 – 24V DC DMX channels (IN = OUT) 24 – 512 number of DMX inputs number of DMX outputs number of modes 1 (bypass) optical isolation of DMX lines insulation breakdown voltage IN/OUT >1000V... - Page 12 Podłęże, 04.02.2025 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: Splitter DMX IP TH Product code: PX165-IP-TH meets the requirements of the following standards, as well as harmonised standards:...
Need help?
Do you have a question about the PX165-IP-TH and is the answer not in the manual?
Questions and answers