3 Connectors and control elements............5 4 Connection scheme...................6 5 Dimensions....................6 6 Technical data.....................7 Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-0 BDO register number 000005972 www.pxm.pl...
Description DMX signal splitter allows branches in extensive DMX installations. Connecting in series multiple receivers in one line may be hard. Applying splitter in the topology allows to create branches on DMX line. Moreover, the PX794 will amplify and regenerate DMX signals, removing interference effects, as well as eliminating signal reflections on the line.
Page 4
4. In case of damage the power cord, cable, replace it with the same technical data. 5. Do not connect the device to the power supply with a damaged (cracked) housing. 6. Any repairs that require the housing to be remove may only be performed with the power off.
Connectors and control elements The PX794 incorporates six DMX outputs and one DMX input. The signaling diode on the front of the splitter indicates the status of the device: • glowing steadily indicates that the splitter is in idle mode •...
Technical data type PX794 DMX input / output lines 1 / 6 DMX line optical isolation overvoltage protection input / output insulation breakdown voltage >1000V DMX signal cable type shielded twisted pair data cable gauge 22 or 24 AWG data cable impedance 120 Ω...
Page 8
Podłęże, 21.11.2019 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: Splitter DMX 1/6 Product code: PX794 meets the requirements of the following standards, as well as harmonised standards: PN-EN IEC 63000:2019-01...
Need help?
Do you have a question about the Splitter DMX 1/6 and is the answer not in the manual?
Questions and answers