Mounting Above A Suspended Ceiling - Cisco Aironet AIR-AP1200 Hardware Installation Manual

Chapter 6 Mounting Instructions
Use a wrench or pliers to tighten the Keps nuts. Do not overtighten.
Step 7
Attach the access point to the mounting bracket.
Step 8

Mounting Above a Suspended Ceiling

The access point mounting bracket is designed to be integrated into the T-bar grid above the tiles of a
suspended ceiling. Using a T-bar box hanger and bracket mounting clip (not supplied) such as the
Erico 512A and BHC, you orient the access point antenna just above the top surface of a standard ceiling
tile. You may need to modify a thicker tile to allow room for the antenna.
Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a
Caution
building's environmental air space; no other power injectors or power modules have been tested to UL 2043
and they should not be placed in a building's environmental air space, such as above suspended ceilings.
It may be helpful to refer to
Figure 6-3
1
1
2
3
4
OL-4310-05
Figure 6-3
Mounting Bracket Parts
4
3
2
Suspended ceiling T-rail
T-rail clip
Height adjustment screw
T-bar box hanger
before proceeding.
5 6
3
7
2
1
5 Bracket mounting clip
6 Access point mounting bracket
7 Access point
Cisco Aironet 1200 Series Access Point Hardware Installation Guide

Mounting Above a Suspended Ceiling

6-5