Anti-Theft Features; Network Configuration Examples; Central Unit In An All-Wireless Network - Cisco Aironet AIR-AP1200 Hardware Installation Manual

Chapter 1 Overview

Anti-Theft Features

There are two methods of securing the access point to help prevent theft:
•
•

Network Configuration Examples

This section describes the access point's role in three common wireless network configurations. The
access point's default configuration is as a root unit connected to a wired LAN or as the central unit in
an all-wireless network. The repeater role requires a specific configuration.

Central Unit in an All-Wireless Network

In an all-wireless network, an access point acts as a stand-alone root unit. The access point is not
attached to a wired LAN; it functions as a hub linking all stations together. The access point serves as
the focal point for communications, increasing the communication range of wireless users.
shows an access point in an all-wireless network.
Figure 1-2
OL-4310-05
Security cable keyhole—You can use the security cable slot to secure the access point using a
standard security cable, such as those used on laptop computers.
Security hasp—When you mount the access point on a wall or ceiling using the mounting bracket
and the security hasp, you can lock the access point to the bracket with a padlock. Compatible
padlocks are Master Lock models 120T and 121T or equivalent.
Access Point as Central Unit in All-Wireless Network
Access point
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Network Configuration Examples
Figure 1-2
1-5