Department Of Communications-Canada; Canadian Compliance Statement - Cisco Aironet AIR-AP1200 Hardware Installation Manual

Appendix B Declarations of Conformity and Regulatory Information
The Part 15 radio device operates on a non-interference basis with other devices operating at this
Caution
frequency when using integrated antennas or those listed in
the product not expressly approved by Cisco could void the user's authority to operate this device.
Within the 5.15 to 5.25 GHz band (5 GHz radio channels 34 to 48) the U-NII devices are restricted to
Caution
indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System
(MSS) operations.
Table B-1
IEEE 802.11b
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Department of Communications—Canada

Canadian Compliance Statement

This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to the following two
conditions:
1.
2.
OL-4310-05
Access Point 2.4-GHz Antennas
Radio
IEEE 802.11g
–
–
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
Cisco Part Number
AIR-ANT1949
AIR-ANT4121
AIR-ANT24120
AIR-ANT2410Y-R
AIR-ANT3549
AIR-ANT2012
AIR-ANT1729
AIR-ANT2506
AIR-ANT3213
AIR-ANT1728
AIR-ANT3195
AIR-ANT5959
AIR-ANT4941
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Department of Communications—Canada
Table B-1. Any changes or modification to
Antenna
Model Gain (dBi)
Yagi 13.5
Omni-directional 12.0
Omni-directional 12.0
Yagi-directional 10.0
Patch 8.5
Spatial diversity 6.5
Patch 6.0
Omni-directional 5.1
Omni-directional 5.0
Omni-directional 5.0
Patch 3.0
Omni-directional 2.0
Dipole 2.2
B-3