Mounting The Access Point Above A Suspended Ceiling - Cisco Aironet 1130AG Series Hardware Installation Manual

2-14 2-14
Chapter 2 2 Chapter Installing the Installing
St Step ep 8 8

Mounting the Access Point Above a Suspended Ceiling

Mounting the Access Point Above a Suspended Ceiling
Caution Caution
Caution Caution
the Access Access Point Point
If needed, drill or cut a cable access hole (see If needed, drill or cut a cable access hole (see Fi Figur
pull the cables through the a ccess hole until you have about 1 foot of exposed cables p pull the cables through the a
hole. hole.
To attach the access point to the mounting plate, see " To attach the access point to the mounting plate, see
section on pag sect ion on page e 2-17. . 2-17
The access point mounting bracket is designed to be integrated into the T-bar grid above the tiles of a The access point mounting bracket is designed to be integrated into the T-bar grid above the tiles of a
suspended ceiling. The access point uses a T-bar box hanger (not supplied) such as the Erico Caddy 512 suspended ceiling. The access point uses a T-bar box hanger (not supplied) such as the Erico Caddy 512
or B-Line BA12 and should be oriented just above the top surface of a standard 5/8-in. (1.59-cm) ceiling or B-Line BA12 and should be oriented just above the top surface of a standard 5/8-in. (1.59-cm) ceiling
tile. You may need to modify a thicker tile to allow room for the access point. tile. You may need to modify a thicker tile to allow room for the access point.
Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a
building's environme building' s environmental air space; the AIR-PWRINJ3 po ntal air space; the AIR-PWRINJ3 power injector and the power mod
to UL 2043 and should not be placed in a building's environmental air space, such as above suspended to UL 2043 and should not be placed in a building's environmental air space, such as above suspended
ceilings. ceilings.
Cisco does not sell Ethernet cable rated for use in a building environmental air space, such as above Cisco does not sell Ethernet cable rated for use in a building environmental air space, such as above
suspended ceilings. You must obtain special Ethernet cable with the appropriate rating. suspended ceilings. You must obtain special Ethernet cable with the appropriate rating.
gure e 2- 2-6
ccess hole until you have about 1 foot of exposed cables p rotruding from the
" Attaching the Access Point to the Moun Attaching the Access Point to the Moun
wer injector and the power mod ule a
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide Cisco Aironet 1130AG Series Access
Mounting the Access Point Above a Suspended Ceiling Mounting the Access Point Above a
6 ) large enough for the access point cables and ) large enough for the access point cables and
Point Hardware Installation Guide
OL-8369-04 OL-8369-04
Suspended Ceiling
rotruding from the
ting Plate" ting Plate"
ule are no re no t tes t tested ted