Cisco Aironet AIR-AP1200 Hardware Installation Manual page 133

Appendix C Access Point Specifications
Table C-1 Access Point Specifications (continued)
Category Access Point with 802.11b or 802.11g Radio
Power Output With 802.11b radio:
With 802.11g radio:
(Depending on the regulatory domain in
which the access point is installed)
Antenna A diversity system with two RP-TNC
connectors for external antennas (Cisco
antennas are sold separately).
OL-4310-05
100, 50, 30, 20, 5, or 1 mW
100, 50, 30, 20, 5, or 1 mW
(at 1, 2, 5.5, and 11 Mbps)
30, 20, 10, 5, or 1 mW
(at 6, 9, 12, 18, 24, 48, and 54 Mbps)
Access Point with 802.11a Radio Module
RM20A radio module:
16 dBm
13 dBm
10 dBm
7 dBm
RM21A radio module or RM22A radio module:
17 dBm
15 DBm
14 dBm
11 dBm
10 dBm
8 dBm
5 dBm
2 dBm
–1 dBm
These values are based on the FCC peak
Note
measurement method as defined in
FCC 15.407 (A)(4)
(Depending on the regulatory domain in which the
access point is installed)
RM20A radio module:
A diversity system consisting of two integrated
4.5 dBi omnidirectional gain antennas or two
integrated 6 dBi directional gain antennas
depending on the positioning of the antenna
assembly.
RM21A radio module:
A diversity system consisting of a dipole array
providing 5 dBi omnidirectional gain or 9 dBi
directional gain depending on the positioning of
the antenna assembly.
RM22A radio module:
A diversity system with two RP-TNC antenna
connectors for external antennas (Cisco
antennas are sold separately).
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
C-3